TR-2 Specifications |
|
| |
|
| Loading Capacity
|
|
Head Pulley Diameter |
|
Tail Pulley Diameter |
Ø268 mm. |
Return Rollers Diameter |
Ø60 mm. |
Return Rollers Pitch |
1200 mm. |
Idler Roller Diameter |
Ø89 mm. |
Idler Roller Pitch |
600, 1250 |
Linear Speed (nominal) |
20-40-80 m/min |
| Mains Supply |
380VAC 50Hz 3 phase |
| Motor Power |
According to Length |
Motor Class |
IP 54 |
Insulation Class |
IP 54 |
Impact Idlers |
Same as Support idlers but at 400 mm spacing. |
Idler Trough Angle |
20º |
| |
2 or 3 ply rubber , Plain or Chevron hot vulcanized welding. |
Take-up Distance |
260 mm.º |
|
Dimensions |
| |
Standard Width (W) / Preferred Values
Outer Distance (Wo)
|
| |
|
|
| |
Exact lengths are available upon request. |
| Options |
| |
Floor Supports |
Yes |
Ceiling Hangers |
Yes |
Wall Mount |
Yes |
Head pulley lagging |
Yes |
Brake Motor |
Yes |
Bidirectional motion |
Yes |
Left or Right Side Drive |
Yes |
|
| |
| Accessories |
| |
Inside scraper |
Yes |
Outside Scrapers |
Yes |
Emergency Pull Cord |
Yes |
Self Aligning Carrying Idler |
Yes |
Discharge hopper |
Yes |
Loading hopper |
Yes |
Side Skirts |
Yes |
Back Stops |
Yes |
Push Button Station |
Yes |
Feed (Tail end) Hopper |
Yes |
Delivery ( Head end) Hopper |
Yes |
Head Pulley Hood |
Yes |
|
